GLQ-12P Stainless Steel Filter

GLQ-12P Stainless Steel Filter - 1

GLQ-12P Stainless Steel Filter

Model GLQ-12
Material Stainless steel
Flow Rate (T/h) 12
Inlet/Outlet Size (in) 1'' BSP
Preset Pressure (MPA) 0.6
Filter Bag Size(mm) 105*380
Filter Area(m³) 0.13
Wall Thickness(mm) 2

Introduction

GLQ series stainless steel single bag filter device is a multi-purpose filter equipment with novel structure,small size, simple operation, energy saving, high efficiency, airtight work, and strong applicability. Bag filter is a kind of pressure filterdevice,mainlycomposed of filter cylinder, filter cylinder cover, quick opening.
GLQ series filter bag is supported by a metal mesh basket inside the filter. The liquid enters the filter bag from the inlet, and flows out from the outlet after being filtered by the filter bag. The impurities are intercepted in the filter bag. The filter bag can be replaced or cleaned to continue to use, the installation is very convenient,and the filter basically has no material consumption.

1. The cylinderis made of 2mm stainless steel,with long service life and corrosion resistance;
2. Simple installation,convenient operation and small footprint;
3. The use of stainless steel bolts to fix the top cover and the filter bucket has a better fixing effect, which can prevent the top cover from loosening and leakage, and the use of filtering is more secure.

4. It has a wide range of uses, which can be used forcoarse filtration or fine filtration;
5. Large effective filtration area and high efficiency;
6. Theinternal material of the filteris also stainless steel.which is corrosion-resistant, durable, and has along service life: the filter bag compression device can avoid side leakage and ensure a better filtering effect.

7. The filter bag is simpler and can be cleaned and used repeatedly saving costs;
8. Bolt structure, good sealing performance, high pressure bearing and not easy to leak;
9. Cylinder material: stainless steel 304,stainless steel 3l6L filter bag material: polyester PE, polypropylene PP, nylon NMO, PTFE.
Filter bag density:1-800um

Specification Parameters

GLQ

Model Tank Height a (mm) Tank Height b (mm) Tank Height
c (mm)
Cart Sizemm  
GLQ-6 350 620 133 600×900  
GLQ-12 500 810 133 600×900  
GLQ-20 500 850 219 600×900  
GLQ-40 800 1200 219 600×1200  
             
Model Flow
T/h
Preset Pressure
(Mpa)
Filter Bag Size (mm) Filter Area (m³) Wall Thickness  (mm) Inlet/outlet
size(in)
GLQ-6 350 0.6 133 600×900 2 1''
GLQ-12 500 133 600×900 1''
GLQ-20 500 219 600×900 2''
GLQ-40 800 219 600×1200 2''
GODO