GLQ-6P Stainless Steel Filter
GLQ-6P Stainless Steel Filter
Model | GLQ-6 |
Material | Stainless steel |
Flow Rate (T/h) | 6 |
Inlet/Outlet Size (in) | 1'' BSP |
Preset Pressure (MPA) | 0.6 |
Filter Bag Size(mm) | 105*230 |
Filter Area(m³) | 0.08 |
Wall Thickness(mm) | 2 |
Introduction
GLQ series stainless steel single bag filter device is a multi-purpose filter equipment with novel structure,small size, simple operation, energy saving, high efficiency, airtight work, and strong applicability. Bag filter is a kind of pressure filterdevice,mainlycomposed of filter cylinder, filter cylinder cover, quick opening.
GLQ series filter bag is supported by a metal mesh basket inside the filter. The liquid enters the filter bag from the inlet, and flows out from the outlet after being filtered by the filter bag. The impurities are intercepted in the filter bag. The filter bag can be replaced or cleaned to continue to use, the installation is very convenient,and the filter basically has no material consumption.
1. The cylinderis made of 2mm stainless steel,with long service life and corrosion resistance; |
|
4. It has a wide range of uses, which can be used forcoarse filtration or fine filtration; |
|
7. The filter bag is simpler and can be cleaned and used repeatedly saving costs; |
Specification Parameters
Model | Tank Height a (mm) | Tank Height b (mm) | Tank Height c (mm) |
Cart Size(mm) | ||
GLQ-6 | 350 | 620 | 133 | 600×900 | ||
GLQ-12 | 500 | 810 | 133 | 600×900 | ||
GLQ-20 | 500 | 850 | 219 | 600×900 | ||
GLQ-40 | 800 | 1200 | 219 | 600×1200 | ||
Model | Flow (T/h) |
Preset Pressure (Mpa) |
Filter Bag Size (mm) | Filter Area (m³) | Wall Thickness (mm) | Inlet/outlet size(in) |
GLQ-6 | 350 | 0.6 | 133 | 600×900 | 2 | 1'' |
GLQ-12 | 500 | 133 | 600×900 | 1'' | ||
GLQ-20 | 500 | 219 | 600×900 | 2'' | ||
GLQ-40 | 800 | 219 | 600×1200 | 2'' |