3'' Stainless Steel QBF3-80P Air Operated Diaphragm Pump (AOD Pump) Powder Diaphragm Pump_QBF3 Powder Pump_Air Operated Diaphragm Pumps

Introduction

	QBF3 SERIES The QBF3 series pneumatic powder pump can transfer powder with a bulk density of 80~800kg/m3,with a maximum conveying capacity of 6T/h and a maximum conveying height of 30m.
	ADVANTAGES Good sealing, no leakage in the whole pump body, safe explosion-proof. With its own pump cavity cleaning system, the material will not be blocked orleft. Economical and practical, easy to install and easy to move. The feed barrel is equipped with a vibrator, and the feed is smoother and there is no residue.

1. lt is possible to avoid contact between operators and powders as much as possible. 2. Bolt fastening structure, using bolt connection to achieve leak-proof.
3. Smaller agitation of materials to avoid heating of materials, no sparks and no heat generation during operation. 4. The gentler internal shearing force ensures that the complete characteristics of the material are not affected to the greatest extent.
5. The fluidizing gas and the pump motor driving gas can be separated to prevent the material from contacting with the air to oxidize and deliquesce; it can be further purified and dried separately when contacted with the powder, or other gases can be used. 6. No dead-point operation, it can work even when the intake pressure is very low.
7. Economical and practical, simple installation, unlike the expensive traditional large-scale pre-in-stalled powder conveyor system. 8. Convenient and easy to use. can be easily moved and used anywhere. Ready to use, no installation and debugging. 9. Conveying powdery, lightweight dry and easy-flowing powder with a bulk density of 80~800kg/m3, with a wide range of uses.

Model: QBF3-80PAAA Body Material: SS304	Model: QBF3-80P316LAAA Body Material: SS316L
Diaphragm Material: Santoprene Valve Ball Material: Santoprene Ball Seat Material: Santoprene
Air Source Pressure: 2-8.4 bar Air Comsumption: 1.5-2m³/min Conveying Capacity: 0-6000kg/h Conveying Height: 30m Air Inlet Size: 1/2'' Feeding Tank Diameter Size: 50cm Feeding Tank Volume: 80L